2010 Camaro SS Vortech V3 Supercharger Kit - Satin

SKU:VOR-4GE218-010L
Dimensions:32x18x18
Weight:80.0 lbs
Manufacturer:Vortech
You must add to cart to see the price
CALL TO ORDER
  • Description
  • Product Fitment
  • Reviews (0)
New Camaro Vortech V3 Supercharger
This new Vortech Complete Supercharger kit(Satin) is exclusively tailored for the 2010 Camaro LS3! Your 6.2L V8 will be taken to a whole new level of performance. Capable of adding 47% more horsepower with only 6.5 to 7.5psi, this centrifugal supercharger delivers these numbers, while maintaining the stock redline. Featuring a V3 Si-Trim self-lubricating supercharger, this complete system is the fastest path to power for any new Camaro SS owner.

Huge LS3 Power Gains
Vortech's LS3 kit is dyno proven to produce 484 horsepower and 421 foot pounds of torque to the rear wheels. These numbers are based on only 8psi, with stock exhaust, and using pump gas. Under these conditions a safe 10.9:1 air fuel ratio is achieved. 

Achieving More Power with Modified a LS3 Camaro
More power can be produced with additional modifications, however shopsupercharger recommends custom ECU tuning and high flow fuel pump to ensure proper AFR's on modified LS3s. Modifications that may effect your new Camaro AFR's, include:
  • Aftermarket camshaft
  • Large diameter exhaust or headers
  • Cylinder head mods
  • Modified supercharger air inlet
  • Supercharger pulley change (drive ratio)
  • Non-Vortech MAF meter
  • Relocation or removal of Vortech supplied flow-straightener from discharge assembly

Fast Installation

Installing your new supercharger takes most SS owners 12 to 14 hours. Basic hand tools are all that is required to bolt on Vortech's V-3 kit. Vortech provides a complete kit with everything you need to complete your NA to superchager transformation.

50 State Emissions Legal
Vortech is in the process of obtaining fifty state emissions certification for this kit. Since this system has not yet been approved by the California Air Resources Board it is currently only officially legal in California for racing vehicles and for off-road use only. This kit retains all factory emissions equipment and it should not contribute to an emissions test failure.

 
This Supercharger Fits:
  • Chevrolet Camaro SS LS3 6.2L V8 2010 and up

Complete Bolt-On Kit Includes:
  • 10 rib supercharger drive system for maximum belt traction and stability:
    • 3.80” drive pulley
    • Stand alone configuration
    • Steel SFI approved race-spec replacement damper by ATI Performance Products
    • Heavy duty automatic drive belt tensioner
    • Hard anodized billet aluminum idlers with dual bearings
    • Hard anodized billet aluminum 7” crank pulley
    • Premium 10 rib drive belt

  • Multi-plate supercharger mounting bracket assembly:
    • Billet aluminum mounting plates for the front and rear
    • Steel laser cut intermediate plate for rigidity
    • Billet aluminum spacers
    • High-grade hardware
    • Dual position automatic belt tensioner mount
    • Front plate configuration allows for simple change to manual idler adjustment for use with “cog-drive” applications

  • Fuel system upgrade (complete systems only) includes:
    • High flow 66 lb/hr replacement fuel injectors
    • Custom injector o-rings
    • Plug and play wiring harness

  • ECU re-flash:
    • Custom Vortech engine tune, developed for your 6.2L LS3 V8

  • Air inlet assembly includes:
    • Custom roto-molded ducting. Maintains 4” diameter equivalent cross-section throughout. Locates filter behind headlight for cooler inlet air temperatures
    • Silicone sleeves
    • Stainless steel clamps
    • High-flow air filter

  • Discharge and charge cooler assembly features:
    • High-capacity welded aluminum charge cooler core (HxWxD =15.6” x 20” x 3.5”) is capable of supporting at least 1000 HP.
    • Aluminum Vortech Race compressor bypass valve
    • Silicone sleeves and stainless steel clamps
    • Mandrel bent 3” aluminum charge tubes for high flow and minimal weight
    • 4” aluminum throttle body inlet duct and billet aluminum MAF housing
    • Integrated air-straightener provides laminar flow through MAF for OEM idle quality and driveability